International Journal
[2025]
1. Molecular dynamics simulation on the enhanced tribological characteristics by sulfur-based tribo-film formation of TiO2/MoS2 heterostructure nanocomposites
Minseo So, Sung-Ho Hong, Seok-Won Kang, 2025.05.14.
Materials Research Express, Vol. 12. pp. 055002
[2024]
2. Improvement of Lubrication Performance in Misaligned Journal Bearings Using Grooves and Rubber under Large Impact Loads
Sung-Ho Hong, 2024. 12.24
Advances in Mechanical Engineering, Vol. 16, No. 12, pp. 1-16 (I.F.=1.9[2023], Q2)
3. Numerical Analysis of the Trapping Effect of Grooves with Various Cross-Sectional Shapes and Reynolds Numbers
Sung-Ho Hong, 2024. 12.05
Lubricants, Vol. 12, No. 12, pp. 432 (I.F.=3.1[2023], Q2)
4. A Novel Design of Journal Bearings for Stability Under Shock Loads
Sung-Ho Hong, 2024. 09.29
Scientific Reports, Vol. 14, 22577 (I.F.=3.8[2023], Q1)
5. Lubrication Modeling of the Reciprocating Piston in a Piston Pump with High Lateral Load and Various Conditions in a Swash Plate-type Piston Pump
Sung-Ho Hong, Jung-Hun Shin, 2024. 02.16.
Lubricants, Vol. 12, pp. 55 (I.F.=3.5[2022], Q2)
6. Numerical Analysis for Appropriate Positioning of Ferrous Wear Debris Sensors with Permanent Magnet in Gearbox Systems
Sung-Ho Hong, 2024. 01. 26.
Sensors, Vol. 24, No. 3, pp. 810 (I.F.=3.9[2022], Q2)
[2023]
7. Lubrication Performance of Misaligned Journal Bearings with Flexible Structure under Shock Load Conditions
Sung-Ho Hong, Woo-Ju Jeon, 2023. 11 .25.
Lubricants, Vol. 11, pp. 500 (I.F.=3.5[2022], Q2)
8. Novel Method for Measuring a Wear Scar Using Deep Learning
Se-Bin Lee, Tae-Wan Kim, Seung-Chul Lee, Sung-Ho Hong, 2023. 10. 26.
Tribology International, Vol.190, pp. 109043 (I.F.=6.2[2022], Q1)
9. A New Type of Misaligned Journal Bearing with Flexible Structure
Woo-Ju Jeon, Sung-Ho Hong, 2023. 06. 10.
Lubricants, Vol. 11, No. 6, pp. 256 (I.F.=3.5[2022], Q2)
10. Numerical Approach and Verification Method for Improving Sensitivity of Ferrous Particle Sensors with Permanent Magnet
Sung-Ho Hong, 2023. 06. 06.
Sensors, Vol. 23, No. 12, pp. 5381 (I.F.=3.9[2022], Q2)
11. Varnish Formation and Removal in Lubrication Systems: A Review
Sung-Ho Hong, Eun-Kyung Jang, 2023. 05. 15.
Materials, Vol. 16, No. 10, pp. 3737 (I.F.=3.748[2022], Q2)
12. Assessment of Condition Diagnosis System for Axles with Ferrous Particle Sensor
Sung-Ho Hong, Hong-Gyu Jeon, 2023. 02. 08.
Materials, Vol. 16, No. 4, pp. 1426 (I.F.=3.748[2022], Q2)
[2022]
13. Application of Condition Monitoring for Hydraulic Oil Using Tuning Fork Sensor: A Study Case on Hydraulic System of Earth Moving Machinery
Hong-Gyu Jeon, Jong-Kyun Kim, Seon-Jun Na, Min-Seok Kim, Sung-Ho Hong, 2022. 10. 31.
Materials, Vol. 15, No.21, pp. 7657 (I.F.=3.748[2022], Q2)
14. Monitoring the Conditions of Hydraulic Oil with Integrated Oil Sensors in Construction Equipment
Sung-Ho Hong, Hong-Gyu Jeon, 2022. 10. 25.
Lubricants, Vol. 10, No.11, pp. 278 (I.F.= 3.5[2022], Q2)
[2018]
15. A New Clearance Design Method for Reciprocating Fuel Pump of Medium-Speed Diesel Engines
Sung-Ho Hong, 2018. 03. 19.
Tribology Transactions, Vol. 61, No. 4, pp. 773-783 (I.F.=1.723[2017], Q2)
[2017]
16. Application of Spiral Grooves in Fuel Pump for Medium-Speed Diesel Engines
Sung-Ho Hong, 2017. 12. 04.
Tribology Transactions, Vol. 61, No. 3, pp. 532-538 (I.F.=1.723[2017], Q2)
17. Effective Test of Lacquer in Marine Diesel Engines
Sung-Ho Hong, Seung-Hwan Ju, 2017. 03.
International Journal of Naval Architecture and Ocean Engineering, Vol. 9, No. 2, pp. 199-208 (I.F.=1.176[2016], Q2)
[2016]
18. A Literature Review of Lacquer Formation in Medium-Speed and Low-Speed Engines
Sung-Ho Hong, 2016. 12. 15.
Journal of Mechanical Science and Technology, Vol. 30, No. 12, pp. 5651-5657 (I.F.=1.327[2016], Q2)
19. A New Type Groove for Hydraulic Spool Valve
Sung-Ho Hong, Kyung-Woong Kim, 2016. 11.
Tribology International, Vol. 103, No. 2016, pp. 629-640 (I.F.=2.903[2016],Q1)
20. Improvement of Lubrication Characteristics in the Reciprocating Fuel Pump of Marine Diesel Engines
Sung-Ho Hong, Bo-Ra Lee, Yong-Joo Cho, 2016. 11. 12.
Journal of Mechanical Science and Technology, Vol. 30, No. 11, pp. 5225-5232 (I.F.=1.327[2016], Q2)
21. The Validity of the Reynolds Equation in Spool Valve Analysis Considering Cavitation
Sung-Ho Hong, Kyung-Woong Kim, 2016. 09. 09.
Friction, Vol. 4, No. 3, pp. 266-276. (I.F.=1.571[2016], Q2)
[2009]
22. EHL Analysis of Rolling Bearings Considering the Effect of the Number of Rolling Elements and the Shaft Load
Sung-Ho Hong, Kyung-Woong Kim, 2009. 12.
KSTLE International Journal, Vol. 10, No. 1/2, pp. 17-22.
In Reparation or Submitted
New Evaluation of Wear Volume Based on Wear Scars Using Segmentation and Principal Component Analysis
Sung-Ho Hong, Sebin Lee, Seungchul Lee, 2024. 05.
Tribology Transactions, Under review
A New Condition Diagnosis Method for Ball Bearings Using Ultrasonic Visualization
Hangyeol Jo, Sung-Ho Hong, Choon-Su Park, Moonsuk Kim, Miao Dai, Sang-Woo Ban, 2024.10.
Structure Health Monitoring, Under review
Evaluation of Lubrication Properties of Used Engine Oil from Automobiles
Sung-Ho Hong, Woo-Sol Hwang, 2024. 10.
Lubricants, Preparation
Numerical Analysis and Experimental Verification for Optimal Process Conditions in Induction Welding of CFRP
Sung-Ho Hong, Jung-wan Lee, Young-seok Oh, 2024. 04.
Composite Part B, Preparation.
Application of Numerical Analysis in Induction Welding of CFRP
Sung-Ho Hong, Young-seok Oh, 2024. 04.
Functional Composites and Structures, Preparation.
Domestic Journal
[2024]
1. Evaluation of Sensitivity of a Ferrous Particle Sensor with Variation of Viscosity in Gearbox Systems
Sung-Ho Hong, 2024.08.30
Tribol. Lubr., Vol.40, No.4, pp. 139-143
[2023]
2. Types and Characteristics of Lubricant Filters
Sung-Ho Hong, Ju-Yong Shin, Tae-Sung Park, Sang-Hoo Lee, 2023. 08.
Tribol. Lubr., Vol.39, pp. 133-138.
[2022]
3. Development of an Integrated Oil Purification System
Sung-Ho Hong, Kyung-Hee Lee, Nam-Wha Jeong, 2022. 08.
Tribol. Lubr., Vol.38, No.4, pp. 121-127.
4. Analysis of Patents Related to Diagnosis of Construction Equipment
Sung-Ho Hong, Beom-Suk Jang, 2022. 08.
Tribol. Lubr., Vol.38, No.4, pp. 143-151.
5. Development of Oil Flushing System with Microbubble Generator
Sung-Ho Hong, Kyung-Hee Lee, Nam-Wha Jeong, 2022. 06.
Tribol. Lubr., Vol.38, No.3, pp. 109-114.
[2021]
6. Development of Dielectric Constant Sensor for Measurement of Lubricant Properties
Sung-Ho Hong, Moon-Sik Kang, 2021. 12.
Tribol. Lubr., Vol. 37, No. 6, pp. 203-207.
7. Development of Experimental Device for Analysis of Hydraulic Oil Characteristics with Dielectric Constant Sensors
Sung-Ho Hong, 2021. 04.
Tribol. Lubr., Vol. 37, No. 2, pp. 41-47.
8. Fabrication of Hydrophobic Surfaces with Stereolithography
Sung-Ho Hong, 2021. 02.
Tribol. Lubr., Vol. 37, No. 1, pp. 1-6.
[2020]
9. CFD Analysis of Trap Effect of Groove in Lubricating Systems: Part II-Variation in Radius of Curvature of Groove Edge
Sung-Ho Hong, 2020. 12.
Tribol. Lubr., Vol. 36, No. 6, pp. 359-364.
10. Review of Application Cases of Machine Condition Monitoring Using Oil Sensors
Sung-Ho Hong, 2020. 12.
Tribol. Lubr., Vol. 36, No. 6, pp. 307-314.
11. Literature Review of Machine Condition Monitoring with Oil Sensors-Types of Sensors and Their Functions
Sung-Ho Hong, 2020. 12.
Tribol. Lubr., Vol. 36, No. 6, pp. 297-306.
12. Process Conditions for the Fabrication of Hydrophobic Surfaces with Different Photo-Curable Resins
Sung-Ho Hong, Heung-Sik Woo, 2020. 10.
Journal of the KSTLE, Vol. 36, No. 5, pp. 267-273.
[2016]
13. CFD Analysis of Trap Effect of Groove in Lubricating Systems: Part I -Variation in Cross-Sectional Shape of Groove
Sung-Ho Hong, 2016. 06.
Journal of the KSTLE, Vol. 32, No. 3, pp. 101-105.
14. Experimental Research on Lubricant Oil in Dual Fuel Medium-Speed Engines
Sung-Ho Hong, Chang-Hoon Park, Jung-Do Park, Chen Eddie, 2016. 06.
Journal of the KSTLE, Vol. 32, No. 3, pp. 82-87.
[2015]
15. Lubrication Characteristics in Fuel Injection Pump with Variation of Fuel Oils
Sung-Ho Hong, 2015. 12.
Journal of the KSTLE, Vol. 31, No. 6, pp. 245-250.
16. Improvement of the Lubrication Characteristics of Fuel Injection Pump for Medium-Speed Diesel Engines: Part II - Application of Grooves
Sung-Ho Hong, Bo-Ra Lee, Yong-Joo Cho, 2015. 10.
Journal of the KSTLE, Vol. 31, No. 5, pp. 213-220.
17. Improvement of Lubrication Characteristics in Fuel Injection Pump for Medium-Speed Diesel Engines: Part I - Application of Profile Shape
Sung-Ho Hong, 2015. 10.
Journal of the KSTLE, Vol. 31, No. 5, pp. 205-212.
18. Optimal Design of Clearance in Fuel Injection Pump
Sung-Ho Hong, Bo-Ra Lee, Yong-Joo Cho, Jong-Kuk Park, 2015. 08.
Journal of the KSTLE, Vol. 31, No. 4, pp. 148-156.
[2013]
19. Comparative Study of the Navier-Stokes Equation & the Reynolds Equation in Spool Valve Analysis Considering Cavitation
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2013. 10.
Journal of the KSTLE, Vol. 29, No. 5, pp. 275-285.
20. Study on Lubrication Characteristics of Spool Valve with Various Cross-Sectional Groove Shapes
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2013. 06.
Journal of the KSTLE, Vol. 29, No. 3, pp. 149-159.
[2012]
21. A Study on the Lubrication Characteristics of Spool Valve with Spiral Groove
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2012. 10.
Journal of the KSTLE, Vol. 28, No. 6, pp. 303-314.
22. 1. A Comparative Study of the Navier-Stokes Equation & the Reynolds Equation in Spool Valve Analysis
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2012. 10.
Journal of the KSTLE, Vol. 28, No. 5, pp. 218-232.
[2006]
23. 1. Thermal Environment Analysis and Evaluation of Thermal Comfort in Automobile Interior
Sung-Ho Hong, Mun-Eon Kim, Man-Hoe Kim, 2006. 10.
Magazine of the SAREK, Vol. 35, No. 10, pp. 34-45.